parallax background
 

« KITS

Shinobi 600W Full-Kit



This Kit Includes:

February 13, 2018

600W HPS 240V

February 13, 2018

LUMATEK 600W 240V

November 13, 2017

Shinobi Parabolic

The standard Lumatek 600W lighting kit is an ideal entry level grow light system featuring the 600W 240V e-ballast, 600W 240V dual spec HPS lamp and Shinobi 80cm white parabolic reflector.

The Lumatek 660W digital ballast provides a stable precise voltage to the lamp creating a higher PAR/PPF output and yet is far more energy efficient than most other ballasts on the market. The latest high output 600W horticultural ballasts from Lumatek are designed to give high yeilds of top quality results, year after year.

Featuring 4 different settings from 250W to 660W, Lumatek Digital ballasts can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps. The proven robust Lumatek 600W Digital Ballast uses best quality components and is so reliable it comes with free 5 year guarantee. Featuring intelligent start up and soft-dimming facility the Lumatek 600W runs extremely efficiently generating much less heat than other conventional ballasts and runs silently As with all Lumatek Ballasts, the latest Lumatek 600w Digital Ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

The 600W 240V dual spec HPS pulse-start lamp has been engineered for use with Lumatek 600W 240V electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.

The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.

The Shinobi 80cm HID parabolic hood has been designed to focus the light straight down uniformly into a 1sqm footprint and is ideal for growing large plants in small grow rooms/tents. Featuring a Variable Vent System, the amount of escaping hot air can be increased or decreased for better canopy temperature control. The reflector is white powder coated aluminium and includes superior wiring and components rated up to 1000W.

Key Specifications:

Electronic ballast for 250W, 400W & 600W HPS or MH lamps
Voltage: 240V 50/60Hz
Input Current Max (A): 2.70A
Input power: 630W
Output power: 600W
Power factor: >0.99
Voltage range: 175 to 275V
THD: <8%
Lamp CCF: <1.7
Operating frequency: high frequency
No audible noise, no flicker
Envirement temperature for full load operation: -25 to 40°C (-13 to 104°F)
Enclosure temperature rise (Δt): 35°C (95°F)
Environment IP require: >IP23
Humidity: capable of operating in relative humidity of 0% to 90%, non-condensing
Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification
EMI suppression certified
Dimensions: 310 x 114 x 81mm
Weight: 2.7 Kg


600W HPS Dual Spectrum Lamp
Lamp Power (W): 600W
Bulb: TD46
Power Voltage: 230V 50Hz
Current (A): 6.2
Power Factor: .92
Rated Hours: 24000
CCT (K): 2100
Luminous Efficiency (lm/W): 150
Luminous Flux (lm): 90000
PAR (micromol/sec): 1000
CRI: 20
Base Designation; E40


Shinobi Reflector
Focused downward uniform light spread
80cm diameter parabolic for 1 sqm light footprint
Can position close to top of plant canopy for more light
Vented top section to reduce heat build-up
Highly reflective White powder coated aluminium
Constructed from premium grade components
1.5mm cable, 750V connector & cable grips
Eliminates hotspots
Supplied with 4m IEC lead for simple connection to ballasts
Can be used with both CFLs and HID lamps
Packaged in flat packs – easier to store and deliver
Clear concise instructions for easy assembly
Rated for HPS/MH grow lamps up to 1000 Watts


 

Request information about this product: