LUMATEK 1000W 240V DIGITAL BALLAST
 

LUMATEK 1000W 240V DIGITAL BALLAST

Introducing the amazing new 1000W Lumatek Digital Ballast. This state of the art digital lighting ballast is one of the most powerful and reliable digital ballasts currently available today. With 30% more lumens than a standard magnetic ballast, the Lumatek 1000w actually uses far less energy too – making it more economic to run and giving higher yields than previously possible.

Featuring 4 different settings, including Super Lumens boost – the Lumatek 1000w can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps.

This fantastic Dimmable Digital Ballast is so reliable it comes with an amazing 5 year guarantee and for safety uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

The Lumatek 1000W also features a fast start up facility and generates much less heat than other conventional ballasts.

Enjoy longer bulb-life too with this high capacity digital ballast, as the Lumatek 1000w is incredibly stable and reliable, ensuring unbeatable grow room results.

Product Code: LUMB0006

Voltage: 220-240V 50/60Hz
Input Current Max (A): 4.70A
Input power: 1030W
Output power: 1000W
Power factor: >0.99
Voltage range: 175 to 275V
THD: <10%
Lamp CCF: <1.7
Operating frequency: high frequency No audible noise, no flicker
Envirement temperature for full load operation: -25 to 40°C (-13 to 104°F)
Ta 30°C 86°F
Tc 70°C 158°F
Humidity: capable of operating in relative humidity of 0% to 90%, non-condensing
Dimensions: 318 x 166 x 96mm
Weight: 4.9 Kg

Electronic ballast for 1000W, 750W or 600W HPS lamp or 1000W or 600W MH lamp
Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification
EMI suppression certified

Special Features:
To light a 600W lamp; set control to 600W.
To light a 750W lamp; set control to 750W and dim down to 600W.
To light a 1000W lamp; set control to 1000W and boost output by 10% by switching to 'Super Lumens' or dim down to 750W or 600W.

  

Request information about this product:

Country *:
Inquiry Type *: PrivateBusiness Owner


Check out our FAQ page, or reach us by e-mail:

For sales support:
orders@lumatek.co.uk

For technical support:
techsupport@lumatek.co.uk