LUMATEK
CONTROL PANEL PLUS (HID+LED)
 

LUMATEK Control Panel PLUS (HID+LED)

The LUMATEK Control Panel PLUS (HID+LED)plus is a dual signal digital lighting controller that offers precise external control of your Lumatek lighting fixtures, drivers and ballasts. Using innovative technology, this controller smartly monitors your grow room temperatures, light timing & intensity automation, safety-controlled dimming and switching On/Off. Simply connect it to your Lumatek Controllable Fixtures, Drivers or Ballasts and easily regulate your grow room environment.

The Lumatek Control Panel Plus is a dual signal twin channel digital lighting controller with each of the two channels (Zones) capable of controlling up to 200 Lumatek controllable HID fixtures or ballasts with a digital RS485 signal or up to 50 LED drivers with analog 0-10V signal. It is possible to use each Zone to control fixtures in two independent separate rooms or to control up to 400 fixtures in one room with two different light source types.

Each Channel (Zone) can control same-powered ballasts/drivers; Zone A can control the same-powered ballasts/drivers as Zone B or Zone B can be set to control different powered ballasts/drivers eg: Zone A can be set to control 600W LED fixtures and Zone B set to control 600W or 315W HID ballasts.

  • Connectable with Lumatek Controllable HID ballasts & fixtures; 315W, 600W, 630W & 1000W
  • Connectable with Lumatek Controllable LED drivers & fixtures; 90W, 465W, 600W & 1000W.
  • Dual signal RS485 digital for HID and 0-10V analog protocol for LED.
  • Automate switching, timing, dimming and simulate sunrise and sunset periods.
  • Temperature-control dimming & switching for safety control
  • Automate light intensity and PPFD
  • Control up to 400 HID ballasts or fixtures (200 ballasts per channel – Zone A & B)
  • Control up to 100 LED drivers or fixtures (50 drivers per channel – Zone A & B)
 

Product Code: LUMM0002

Power: Adaptor 100 - 240V AC 50/60Hz – DC 5V/2A
Match HID Ballast: 315W, 600W, 630W, 1000W
Match LED Driver: 90W, 465W, 600W, 1000W
Power Dimming Range: 10% - 115%
Power Regulation Accuracy: 1%
Temperature-controlled Safety Dimming range: 0ºC-40ºC
Temperature-controlled Safety Switching range: 10ºC-50ºC
Sunrise and Sunset Duration: 0-30 min
Dimensions: 125mm x 80mm x 25mm

Control panel for up to 400 HID ballasts or 100 LED drivers
Two channels (Zone A & Zone B)
Max number of ballasts/drivers per Zone: 200 (RS485) HID or 50 (0-10V) LED
Total number of ballast/drivers per controller: 400 (RS485) HID or 100 (0-10V) LED
24 Hr Light timing & switching
Temperature sensor monitoring and control
Dimming control (1% increments)
Safety and temperature control automation
Simulate sunrise and sunset to lessen plant stress
Light intensity automation

Items included:
1 x Lumatek Control Panel Plus
1 x Power adaptor and cable
2 x Temperature sensor 5m cable
2 x HID control link cable 5m
2 x LED control link cable

Request information about this product:

Country *:
Inquiry Type *: PrivateBusiness Owner


Check out our FAQ page, or reach us by e-mail:

For sales support:
orders@lumatek.co.uk

For technical support:
techsupport@lumatek.co.uk

Slide The warranty term is 3-years full pro-rated beginning on the date of purchase. Misuse, abuse, or failure to follow instructions, are not covered. Any changes or adaptations to the product of any kind will void the warranty.

LUMATEK will, at our option, repair or replace products covered under this limited warranty. To request warranty service, you must return the unit with your proof of purchase to your place of purchase, within the warranty period. If warranty service is required, LUMATEK’s distribution partner will issue a Return Material Authorization Number. LUMATEK will ship the repaired or replacement products to you freight prepaid. Purchase date is based on the original sales receipt. Please save your receipt as a copy is required for all warranty services.

* Excluding the Australian market where the warranty is 3 years
3 Year Manufacturer Warranty